Skip to main content

Cleanroom wipe overview

and comparison

Here we present you an overview of the requirements and properties of the different fabric types of wipes that Dastex offers you.

The correct wipe? Limit the suitable series with our wipe finder


Show comparison list

passende Tücher vergleichen.
Softness
Particle generation
Abrasion resistance
Electrostatic behaviour
Chemical permanence
Dry cleaning
Wet cleaning
Sealed edges
decontaminated
sterile

Cotton

Series 100

100% twill woven cotton, good absorption power

compare
-
-
-

Cellulose

Series 200

Non-woven fabric, 100% cellulose, hydroentangled

compare
-
-
-
Bemcot™ M-3 II

100% cellulose (Cupro), acetone resistant

compare
-
-
-

Polyester-cellulose

Series 300

Non-woven fabric, 45% PES / 55% CEL, hydro-bonded. For general cleaning.

compare
-
-
-
Series 300 S

Non-woven fabric, 45% PES / 55% CEL, hydro-bonded. For general cleaning. Validated sterile.

compare
-
-
Series 301

Non-woven fabric, 45% PES / 55% CEL, hydroconsolidated. Good absorption of solvents and greases.

compare
-
-
-
Series 301 S

Non-woven fabric, 45% PES / 55% CEL, hydro-bonded. Good absorption of solvents and greases. Gamma irradiated.

compare
-
-
Series 301-IO

Non-woven fabric, 45% PES / 55% CEL, hydro-bonded. Good absorption of solvents and greases

compare
-
-
-
Series 301-IO S

Non-woven fabric, 45% PES / 55% CEL, hydro-bonded. Good absorption of solvents and greases. Gamma irradiated.

compare
-
-
Series 302

Non-woven fabric, 45% PES / 55% CEL, hydro-bonded. Low particle, very clean, for cleaning of sensitive areas.

compare
-
-
-
Series 302 S

Non-woven fabric, 45% PES / 55% CEL, hydro-bonded. Low particle, very clean, for cleaning of sensitive areas. Validated sterile.

compare
-
-
Series 303

Non-woven fabric, 45% PES / 55% CEL, hydro-bonded. Very little scratching or smearing of the surface to be cleaned.

compare
-
-
-
Series 303 S

Non-woven fabric, 45% PES / 55% CEL, hydro-bonded. Very little scratching or smearing of the surface to be cleaned, gamma irradiated.

compare
-
-
Series 304-1

Non-woven fabric, 45% PES / 55% CEL, hydroconsolidated, blue colouring for visualization of liquids.

compare
-
-
-
Series 305

Non-woven fabric, 49% PES / 51% CEL, hydroentangled, textured structure, therefore higher absorbency.

compare
-
-
-
Series 309

Non-woven fabric, 45% PES / 55% CEL, hydro-consolidated, very light and especially inexpensive wipe.

compare
-
-
-

Polyester

Series 401

Non-woven fabric, 100% PES, hydroentangled, without chemical binders, low stress of NVR and ions.

compare
-
-
-
Series 402

Knitted wipe, 100% PES continuous filament, very low self-particle generation, very good absorption power, low stress on NVR and ions.

compare
-
-
Series 403

Knitted wipe, 100% PES continuous filament, low inherent particle generation, particularly soft handle, good absorption power.

compare
-
-
Series 405

Knitted wipe, 100% PES continuous filament, laser-cut edges, low inherent particle generation, highest absorption capacity.

compare
-
Series 406

Knitted wipe, 100% PES continuous filament, good absorption power, cost-effective.

compare
-
-
-
Series 407

Interlock fabric, 100% PES continuous filament, cold cut edges, abrasion resistant.

compare
-
-
-
Series 409

Knitted wipe, PES with Nega-Stat® carbon fibres, electrostatically dissipative.

compare
-
-
Series 410

Double-layer knitted wipe, 100% PES, ultrasonically sealed edges, very high absorption capacity.

compare
-
Series 410-bulk S

Double-layer knitted wipe, 100% PES, edges sealed by laser, very high absorption capacity, gamma irradiated.

compare
Series 410-IO

Double-layer knitted wipe made of 100% polyester continuous filament, laser-sealed edges, good absorption capacity.

compare
-
Series 410-AF

Double-layer knitted wipe of 100% polyester continuous filament, ultrasonically cut and sealed edges, good absorption capacity.

compare
Series 414

Knitted wipe, 100% PES continuous filament, particularly clean, very absorbent, tear-resistant, high abrasion resistance, good chemical resistance.

compare
-
Series 415

Knitted 100% PES, sealed edges, absorbent, very clean, high abrasion resistance, good chemical resistance, gamma irradiated.

compare
-
Series 415 S

Knitted 100% PES, sealed edges, absorbent, very clean, high abrasion resistance, good chemical resistance, gamma irradiated.

compare
Series 417

Knitted wipe, 100% PES, sealed edges, very clean, good chemical resistance for cleaning critical areas.

compare
-
Series 418

Knitted wipe, 100% PES, cut edges, very good absorption power, very robust, low particle emission, good chemical resistance.

compare
-
-
Anticon 100® StandardWeight™

Knitted wipe, 100% PES, running stitch-free, low inherent particle generation, very good absorption power, resistant to chemicals.

compare
-
StatZorb®

Knitted wipe, 98% PES, 2% PA 6,6, electrostatically conductive, low particle emission, resistant to chemicals

compare
-

Special requirements

Series 400-AF

Water jet bonded non-woven fabric made of microfibres (70% PES / 30% PA), good absorption power, abrasion resistant, tear resistant, resistant to chemicals.

compare
-
-
-
Series 425

Microfibre knitted wipe, 70% PES / 30% PA, very clean, tear-resistant, very good absorption power, high cleaning effect

compare
-
Series 425 S

Microfibre knitted wipe, 70% PES / 30% PA, very clean, tear-resistant, very good absorption power, high cleaning effect. Gamma irradiated.

compare
Series 428

Knitted,100% PES, laser-sealed edges, extra fine, very clean, high absorption power, chemical resistance.

compare
-
Clino® One Way Profi

Microfibre wipe, 80% PES / 20% PA, very abrasion resistant, chemically resistant.

compare
-
Clino® One Way Premium

Microfibre wipe, knitted, 100% PES, non-abrasive, very abrasion resistant, chemically resistant.

compare
-
Series 700

Three-ply non-woven fabric wipe (PP/CEL/PP), particularly absorbent, good tear resistance.

compare
-
-
-
Series 704

Non-woven fabric wipe, 100% PP, good absorption power, recommended for applications with acids, alkalis and solvents.

compare
-
-
-
Series 706

Non-woven fabric wipe, 100% PP, high absorption power, good particle absorption, low abrasion.

compare
-
-
-

Saturated wipes

Series 707

Non-woven fabric wipe, 100% PP, saturated with 70% IPA / 30% deionised water.

compare
-
-
-
-
PROSAT® Wipes

Non-woven fabric wipe, 100% PP, pre-impregnated with 70% isopropanol / 30% deionised water.

compare
-
-
-
PROSAT® Sterile Wipes

Non-woven fabric wipe, 100% PP, presaturated with 70% isopropanol / 30% DI water, sterile.

compare
-
-
-
PROSAT® Wipes PS-850

Non-woven fabric wipe, 100% PP, impregnated with 70% IPA / 30% DI water, very clean.

compare
-
-
-
-
PROSAT® Sterile PS-7030IR

Non-woven fabric wipe, 100% PES, impregnated with 70% IPA / 30% Dl water, gamma irradiated.

compare
-
-
-
PROSAT® Sterile Low Endotoxin

Knitted wipe, 100% PES, saturated with 70% IPA / 30% WFI water, gamma irradiated, low in endotoxins.

compare
-
-
Series 909

Non-woven fabric, PES/CEL, impregnated with 70% IPA / 30% DI water, validated sterile.

compare
-
-
-
PROSAT® PSC20005

Non-woven fabric wipe, 46% PES / 54% CEL, saturated with 70% IPA / 30% DI water, validated sterile.

compare
-
-
-
Are you insecure? 

If you do not know which type of wipe is suitable for you, please do not hesitate to contact us. We will be happy to advise you!

To the contact page