Skip to main content
Dastex Reinraum ZubehörDastex Reinraum Zubehör

Series 200

Cellulose wipe

Back to our cellulose wipes

The series 200 wipes are very liked due to their low-lint non-woven fabric. They consist of a special blend of hemp and cellulose fibres which are hydro-entangled to form a clean wipe. The result: very low values of extractable substances and moderate particle emission. The wipes are also suitable as an absorbent layer between two surfaces.

 

Facts

Particle emission (dry)
Particle emission (wet)
Abrasion resistance
Wet cleaning
Dry cleaning
Chemical permanence
Electrostatic behaviour
Softness
Sealed edges
decontaminated
sterile

Cellulose

Series 200

Non-woven, 100% cellulose

-
-
-

Properties

  • 100% cellulose (hemp/cellulose blend)
  • hydroentangled non-woven fabric
  • double bag packing

Advantages

  • high absorptive capacity in relation to the mass per unit area
  • electrostatic neutral
  • cost-effective

Applications

  • ideal for cleaning uncritical areas
  • wiping operations at the workstation
  • suitable as an absorbent layer between two surfaces

Product recommen­dation based on cleanroom classes


123456789low dust


ABCDE

Of course, cleanroom wipes used in ISO 5 can also be used in ISO 9, but in this case the economic efficiency and usefulness should be considered.

A 1 to 1 allocation of cleanroom wipes to an air cleanliness class according to ISO 14644-1 is not possible. Recommendations can only be made on the basis of special properties relevant from a cleanroom technical point of view, such as "abrasion resistance" or "particle emission". Users can find further information on this in VDI Guideline 2083 Part 9.2.

Technical data

Properties   Unit of measurementValueTest method
Material     100% cellulose blend fabric
(hemp/cellulose) 		 
Edge processing     cold cut  
Mass per unit area   g/m2 17  
Absorptive capacity
(Ai) intrinsic
(Ae) extrinsic 		 
ml/g
ml/m2
9.5
167 		IEST-RP-CC004.3
NVR
Non-volatile residues		 IPA based
DI water based 		g/m2
g/m2		 0.016
0.024 		IEST-RP-CC004.3
Particle residues 0.5 – ≤ 5.0 µm
> 5.0 – ≤ 100 µm 		million/m2
million/m2		 17
0.09 		IEST-RP-CC004.3
Section 6.1.3 Biaxial Shake Test
Fibre residues > 100 µm fibres/m2 1,080 IEST-RP-CC004.3
Section 6.2.2.2
Ionic residues Sodium (Na+)
Chloride (ClO2-) 		ppm
ppm 		126
46 		IEST-RP-CC004.3
Section 7.2.2.1
Organic contaminants silicone oil
amides
D-n-octylphthalate (DOP)
   n. s.
n. s.
n. s. 		by FTIR spectrometer
Fourier transform infrared spectrometer
  DimensionsPU per bagArt. No.  
  6" x 6"
9" x 9"
12" x 12"
18" x 18" 		500 pieces
500 pieces
500 pieces
500 pieces 		55200 0606
55200 0909
55200 1212
55200 1818 		 
      n. s. = not specified
n. d. = not detectable		  

Note

The manufacturer's technical data listed above are typical values at the time of publication. They are not specifications. All data are without guarantee, changes are possible without prior notice.
Due to different test methods depending on the respective manufacturers and test laboratories, most of the given values cannot be compared one-to-one with those of other manufacturers/wipes.
Independent tests can be commissioned on request.

To top