Coverall/overall
with zipper at legs
The main feature of the coverall/overall with zipper at legs is a continuous zipper in the inner leg seam. In contrast to the classic coveralls, this one has no zipper and no seams in the front part. The elastic waist band is fixed in the back part and is not flexibly adjustable due to the dressing procedure.
Basic models
- spiral zipper in the inside leg seam
- waistband with tight gathering in the back part
- raglan sleeve cut
- arm/leg ends are free selectable
Shown on pictures (from left to right):
Basic model C05
- integrated hood – open field of view
Basic model C01
- short zipper at the collar
- supplementary hood models and sizes are free selectable
Basic model C07
- integrated eye slit hood
Further additional equipment is free selectable.
Variations
This is only a selection of possible additional equipment.
Further options are available on request!
- flat hood top
- half-height hood top
- hood with ballon shaped top (type bouffant)
- ear nets (different versions)
- fastening options for face masks:
press studs inside or outside, velcro outside - for width adjustment at the back of the hood:
buckle, press studs, velcro - cover of the zipper slider at the chin
- special design: slits for temple spectacles
- knitted cuffs
- conductive knitted cuffs
- combi cuff (elastic cuff on the outside, knitted cuff on the inside)
- elasticated cuffs (small and wide)
- simple hem
- press studs at hem
- knitted cuff with thumb loop
- thumb loop
- both sides open and press studs at the hem
- both sides open and elasticated cuffs 40 mm at the hem
- both sides open with shortened zipper, press studs to shorten the leg length
- both sides closed and knitted cuffs
- both sides closed and knitted cuffs with elastic strap
- open pocket (various sizes)
- pocket with flap to close
- various pockets with outlets
- pocket with coloured flap
- net pocket for ID-card
- loop for mobile phone
- loop for pencil (short or long)
The positions of all pockets can be customized!
Also the loops are free in position!
- different zippers
- reinforced cover strip for zippers
- mesh inserts and reinforcements
- additional press studs at the back or on the side of the trouser leg for attaching overboots
- press studs to attach on sleeves/waist or trouser legs/thighs to avoid contact with the floor during the dressing procedure
- name clip band
- imprint with company logo
- carrier-related coding
- individual parts can be contrasted in colour or made of a different fabric, e.g. for marking different cleanliness zones
- bag for mobile phone
- tool bag
- hip bag with integrated belt
Product recommendation based on cleanroom classes
Air cleanliness class EN ISO 14644-1
particulate monitored areas
Hygiene zones according to GMP
microbiological monitored areas
PPE
Personal protective equipment
Regulation (EU) 2016/425
Coverall with zipper at legs
This is an example of a special model with higher protection
The coverall can of course be adapted to further special customer requirements!
Textiles with PTFE finish
Some application processes require that no liquids can pass through the fabric. For these special requirements, textiles are usually equipped with an additional PTFE (polytetrafluoroethylene) finish – colloquially also called Teflon™ finish – which is intended to prevent the penetration of a water-based liquid as far as possible.
However, the effect of the finish diminishes with increasing washing cycles, but, depending on the application, can be refreshed as required by a textile service partner.
