The fabric Light-Tech II is mainly used for the manufacturing of so-called cleanroom suitable undergarments. The low mass per unit area, combined with an extremely pleasant touch (silk-like), are the special characteristics of this fabric.
A conductive version of Light-Tech II is also available (see Light-Tech AS).
Fabric properties Important properties at a glance
- EElectrostatic behaviour
- MMechanically resilient
- TWearing comfort
- DElasticity
- WAntimicrobial
Available colors
The evaluation of the textile properties listed here is primarily based on empirical values and only partly on real measured values.
Product recommendation based on cleanroom classes
Cleanroom suitable undergarments made of Light-Tech II can basically be worn in any cleanroom class area.
Various studies have shown that the use of a suitable cleanroom-suitable intermediate garment can reduce both the microbiological contamination and the number of possible particulate impurities by 50% and more.
Technical data
| (1) Fabric | 100% polyester |
|---|---|
| (1) Weave type | plain weave |
| (1) Mass per unit area | approx. 95 g/m2 |
|
(1) Yarn type warp: weft: | polyester 50 den/192 F polyester 150 den/216 F |
|
(1) Thread density warp: weft: | 44 warp threads/cm 34 weft threads/cm |
| (1) Water-vapour permeability unwashed (JIS L 1099-A1) | 11,440 g/m2 x 24 h |
(1) Manufacturer information
The above information is the result of tests carried out by the supplier to the best of his knowledge.
They are not specifications but typical values at the time of publication.
All information is without guarantee and changes are also possible without prior notice.
Due to different testing methods depending on the respective manufacturers and testing institutes, most of the values indicated cannot be compared one-to-one with those of other cleanroom fabrics.
Synthetic fabrics can shrink up to 3% during the decontamination process.
Issue 09/2019