Skip to main content

PROSAT® Sterile™ PS-7030IR

Saturated wipe

Back to our saturated wipes

The wipe PROSAT® Sterile™ PS-7030IR from CONTEC® uses a high-quality non-woven fabric from DuPont™. It is currently one of the cleanest non-woven wipes on the market.  The 100% hydroentangled polyester non-woven fabric is extremely soft, clean and durable.

The pre-saturated wipes are gamma-irradiated according to AAMI guidelines. They have low values of particles and extractable substances. The wipes are packed in a flat, reclosable pouch with a tamper-proof label.

Facts

Particle emission (dry)
Particle emission (wet)
Abrasion resistance
Wet cleaning
Dry cleaning
Chemical permanence
Electrostatic behaviour
Softness
Sealed edges
decontaminated
sterile

Saturated wipes

PROSAT® Sterile™ PS-7030IR

Non-woven, 100% PES, with 70% IPA / 30% DI water, validated sterile

-
-
-
-

Properties

  • 100% polyester 
  • hydroentangled non-woven fabric 
  • saturated with 70% IPA/30% DI water (USP quality)
  • validated sterile (SAL of 10-6)
  • resealable PE pouch with a tamper-evident label, packed in a bag and outer bag

Advantages

  • low particle and fibre emission
  • fast and efficient cleaning
  • reduces the storage of cleaning agents
  • easier to transport, store and use
  • even application of the cleaning solution

Applications

  • wiping of objects before the airlock procedure
  • for quick and practical surface cleaning of equipment and parts 
  • wet cleaning of scratch-sensitive surfaces to specifically remove chemical residues

Product recommen­dation based on cleanroom classes


123456789low dust


ABCDE

Of course, cleanroom wipes used in ISO 5 can also be used in ISO 9, but in this case the economic efficiency and usefulness should be considered.

A 1 to 1 allocation of cleanroom wipes to an air cleanliness class according to ISO 14644-1 is not possible. Recommendations can only be made on the basis of special properties relevant from a cleanroom technical point of view, such as "abrasion resistance" or "particle emission". Users can find further information on this in VDI Guideline 2083 Part 9.2.

Technical data

Properties   Unit of measurementValueTest method
Material (fabric)     100% PES  
Saturation solution     70% IPA (USP grade) / 30% deionised water  
Edge processing     cut  
Mass per unit area   g/m2 67  
Non-volatile residues
NVR
IPA based
DI water based
g/m²
g/m²
0.008
0.055
IEST-RP-CC004.3, Sec. 7.1.2
IEST-RP-CC004.3, Sec. 7.1.2
Particle residues ≥ 0.5 µm x 106/m2 39.3 IEST-RP-CC004.2, Sec. 5.1.2
Fibre residues > 100 µm x 103/m2 10.4 IEST-RP-CC004.2, Sec. 5.2
Ionic residues Sodium (Na+)
Chloride (ClO2-)
ppm
ppm
1.9
4.7
IEST-RP-CC004.3, Sec. 7.2.2
IEST-RP-CC004.3, Sec. 7.2.2
Sterilisation Gamma radiation   yes AAMI Guidelines
  DimensionsPU in a caseArt. no.  
  9" x 9"
(~ 23 x 23 cm)
800 pieces
20 pcs./Pouch
59803  

Note

The manufacturer's technical data listed above are typical values at the time of publication. They are not specifications. All data are without guarantee, changes are possible without prior notice.
Due to different test methods depending on the respective manufacturers and test laboratories, most of the given values cannot be compared one-to-one with those of other manufacturers/wipes.
Independent tests can be commissioned on request.

To top